Skip to main content

SmartWaste settings in Weighsoft

A full explanation of every setting under Administration > System Settings > External Systems > SmartWaste, controlling what is sent to SmartWaste and when.

Written by Phil Whitehead

The SmartWaste settings control when your tickets are sent to SmartWaste and what Weighsoft sends with them. This article explains every setting.

Before you start

  • You need permission to change system settings.

  • Changes apply to future postings only. Tickets already posted are not changed.

Steps

  1. Go to Administration > System Settings > External Systems > SmartWaste.

  2. Review the settings in the table below.

  3. Change the settings you need.

  4. Save.

Setting

What it does

Enabled

Turns the SmartWaste integration on. Until this is ticked, no tickets are sent.

Send To Portal

Also makes your SmartWaste product mappings available in the customer portal.

URL

The SmartWaste address Weighsoft posts to. SmartWaste provide this. Only change it if they ask you to.

SmartWaste From Date

The earliest ticket date that will be sent. Tickets dated before this are ignored. This stops historic data being posted when you first go live.

Post After Days

How many days after invoicing Weighsoft waits before posting a ticket. This gives you time to correct a ticket before it reaches SmartWaste.

Default Supplier

The waste carrier used when a ticket has no supplier of its own.

Default Tip Outlet

The waste destination used when a ticket has no tip outlet of its own.

Default Project Phase

The project phase used when neither the address nor the ticket has one.

Waste Destination Carrier Route

How Weighsoft chooses the carrier when it sends a waste destination. Choose Outlet Supplier, then Default Supplier, or Outlet Supplier, then Transaction Supplier, then Default Supplier to use the ticket's own supplier before the default.

Transaction Post Carrier Route

The same choice, applied when the ticket itself is posted.

Single User

Uses one SmartWaste login for all postings instead of one login per customer.

Post Zero Value Transactions

Sends tickets that have no charge on them.

Attach Tickets

Sends a copy of the ticket document with the posting.

Post Weighsoft Rates

Sends your Weighsoft recycling rates to SmartWaste. Turn this off if your customer maintains rates in SmartWaste themselves.

Post Sub Product Rates

Also sends rates held against sub products. SmartWaste only accepts rates on main products, so leave this off unless advised otherwise.

Exclude Product Specific Rates For Waste Types

Lists the waste types that should not have product specific rates sent.

Fill Default Products

The Fill Default Products function on the same screen creates the standard SmartWaste product mappings. You then only adjust the ones that differ.

Expected outcome

Weighsoft sends tickets to SmartWaste according to your settings. Failed postings caused by missing defaults or carrier choices stop occurring for future tickets.

Did this answer your question?